Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterTrusted Chimney Repair for Flushing Homeowners
Chimney Repair in Flushing typically runs $450 to $3,200 depending on what the camera finds, and most mortar repointing or flashing work is completed in a single day. We’ve repaired more than 38,000 chimneys since 2009, every one quoted in writing before a single brick was touched. If you’re seeing crumbling mortar, water stains on the ceiling near the flue, or brick faces popping off, call (516) 240-9191 and we’ll schedule a Level 2 camera inspection this week.
Flushing’s older Tudor and colonial homes, particularly in Broadway-Flushing and Bowne Park, carry brickwork that’s been through sixty-plus winters of freeze-thaw cycles. We know exactly what that does to mortar joints and crown caps in this part of Queens. Corrine Halstead, who leads our Flushing team, has spent nearly two decades documenting chimney failures in Northeast Queens, and she’ll tell you the same thing every time: the chimney doesn’t lie if you put a camera down it.
Written by Corrine Halstead, Owner at Level Two Chimney Flushing, serving Flushing since 2009.
What Our Chimney Repair Service Includes
Mortar Repointing
Mortar Repointing removes deteriorated mortar from between bricks and replaces it with fresh material matched to your home’s original mix. In Flushing, mortar joints typically start failing after 25 to 30 years, especially on the north-facing chimney sides that never fully dry after rain. We grind out the damaged joints to a consistent depth, pack in new mortar, and tool the finish to match your existing brickwork profile.
Spalling Brick Repair
Spalling Brick Repair addresses what happens when water gets inside the brick, freezes, and blows the brick face off. You’ll see thin brick shards on the ground near the chimney or on the roof itself. We replace spalled bricks with matching units, and just as important, we find where the water came from in the first place so the repair isn’t repeated in two years.
Chimney Waterproofing
Waterproofing applies a breathable masonry sealant that stops water from entering the brick while still letting moisture vapor escape. It’s not paint, and it won’t change the look of your chimney. On Flushing homes where the crown and flashing are sound but the brick just drinks water, this is the most cost-effective repair we do.
Flashing Repair
Flashing is the metal seal where the chimney meets the roof, and it’s the number one leak point on any chimney in Flushing. We see improper flashing work constantly, patched with roof cement or installed without a cricket on wider chimneys. We remove the old flashing, install new step and counter flashing with proper overlap, and document every seam with photos before we leave.
Chimney Rebuilding
When the top courses of brick are so deteriorated that repointing won’t hold, we rebuild the chimney from the roofline up or from a stable point below the damage. This usually becomes necessary in Flushing when a chimney has gone 10+ years without repointing and the bricks themselves have begun to crumble. We rebuild to NFPA 211 clearances with the same brick style and a new crown poured with proper overhang and drip edge.
Tuckpointing
Tuckpointing is the finer cousin of repointing: a thin contrast line of lime putty is applied over a flush mortar joint to create the illusion of very thin, precise joints. You see it most on Flushing’s historic brick homes in the Broadway-Flushing Historic District. We do true tuckpointing, not a painted line, and we can match the putty color to the original.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Chimney Repair
Most of the liner work we perform in Flushing uses DuraFlex stainless steel systems, which we’ve installed since 2009 across hundreds of Flushing homes. We stock their standard transition plates, top plates, and rain caps on our trucks, which means a liner job doesn’t stall because a part is on order. We know their sizing chart well enough to quote a liner job accurately from photos before we ever put a ladder against the house.
For flue resurfacing rather than full replacement, we work with HeatShield cerfractory sealant, which lets us restore a clay tile liner without demolition in many cases. We’ve also done extensive crown and cap work with Olympia Chimney components. Whether your chimney has original clay tiles, a stainless liner, or a cast-in-place system, we can repair it. We work on every make and configuration out there, and if we can’t fix it, we’ll tell you before you spend a dollar.
BeforeAfterSigns You Need Chimney Repair Right Now
- White staining (efflorescence) on the brick face. Efflorescence means water is moving through the masonry and leaving salt deposits behind. It’s not cosmetic. It tells you water is already inside the chimney structure, and in Flushing’s freeze-thaw winters, that water will expand and crack the brick from the inside.
- Falling mortar crumbs or sand at the base of the fireplace. Mortar joints erosive from the top down drop grit into the firebox. If you see a little pile of sand in the firebox after a rainstorm, the flue interior is degrading and the chimney is shedding its own structure.
- Water stains on the ceiling or wall adjacent to the chimney chase. This almost always traces back to flashing failure or a cracked crown. The longer it goes, the more roof sheathing and framing you’ll be replacing along with the chimney repair itself.
- Brick faces on the ground or on the roof. A spalled brick means the brick itself has failed, not just the mortar. You’re usually looking at brick replacement plus waterproofing, and if it’s widespread, a rebuild may be the honest call.
- A rusted damper or visible rust streaks inside the firebox. Rain water is entering the flue directly. The damper rusts first, then the smoke chamber, then you’re dealing with firebox repair as well. This is the easiest thing to spot on your own before it gets expensive.
Our Chimney Repair Process - Step by Step
- 1
Level 2 camera inspection and photo documentation. We send a camera through the entire flue system, from firebox to cap, and record stills at every transition point: smoke chamber, damper seat, flue tile joints, crown, and cap. You see everything we see before we recommend anything. This is Clause 4 of the Haven Standard, and we’ve done it on every job since 2009.
- 2
Written scope with line-item pricing. You get a written price, written scope, and written warranty before any work begins. Not an estimate. A fixed number. If the repair is more complex than expected once we open it up, we stop and write a new scope before spending another dollar of yours. Clause 1 of the Haven Standard: Have it in writing.
- 3
Scheduled repair with a named technician. You’ll know who’s coming, their license number is on the page, and you’ll get a text when they’re en route. No subcontractors, no mystery crews. The technician assigned to your Flushing chimney is the one who does the work.
- 4
Repair with materials matched to your chimney. We match mortar color and texture, brick type, and flashing metal to what’s already there. On liner work, we use DuraFlex stainless or HeatShield sealant depending on what the camera showed. The goal is a repair that doesn’t announce itself.
- 5
Photo-documented closeout and warranty. When the job is done, you receive the complete photo record: before, during, and after images showing what was repaired and how. The warranty is written, specific, and backed by the 365-Day Done Right Promise: if it’s not done right, we make it right.
How Much Does Chimney Repair Cost in Flushing?
Chimney repair in Flushing spans a wide range, and how much Chimney Repair costs because “repair” covers everything from a forty-dollar caulk job to a full teardown and rebuild. What you’ll actually pay depends on the specific failure:
| Repair Type | Typical Flushing Range |
|---|---|
| Mortar repointing (partial, up to 30 joints) | $450 - $1,200 |
| Full repointing of exposed chimney | $1,500 - $3,200 |
| Flashing replacement (standard install) | $650 - $1,400 |
| Flashing with custom cricket | $1,200 - $2,200 |
| Chimney waterproofing | $350 - $800 |
| Spalling brick replacement (per brick) | $50 - $120 |
| Flue liner (stainless, 25-35 ft) | $3,000 - $5,500 |
| Chimney rebuild (above roofline) | $4,000 - $9,000 |
What drives the price: scaffold access (many Flushing homes have tight side yards), chimney height, whether the brick is standard or historic-sized, and the condition of what’s underneath the first layer of damage. The way to avoid overpaying is simple: get a camera inspection, get a written scope, and get a second opinion if you want one. We’ll even provide a Free Second Opinion on any written estimate you get from another company. Every estimate we write includes the full line-item scope, the warranty terms, and the price we’ll honor. No call-for-a-quote games. Call (516) 240-9191 and we’ll put it in writing.
Chimney Repair Near Flushing - Our Service Area
We repair chimneys throughout Flushing, from Kissena Park to Auburndale, and across the surrounding Queens neighborhoods. Most Flushing jobs are reached within one business day of your call. You’ll also find us regularly working in Jackson Heights, Bayside, Elmhurst, Forest Hills, Fresh Meadows, Astoria, Jamaica, Long Island City, Throgs Neck, and the Upper East Side in Manhattan. If you’re unsure whether we cover your block, call (516) 240-9191 and ask.
Serving Flushing, NY - Our Local Coverage Area
We’re based in the Flushing area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Chimney Repair in Flushing
Chimney repair is any work that restores the structural or functional integrity of your chimney: repointing mortar joints, replacing cracked or spalled bricks, rebuilding the crown, sealing flue liner gaps, or replacing flashing. It is distinct from chimney cleaning, which removes creosote and soot but does not address structural issues. At Level Two Chimney Flushing, we never recommend repair without photo documentation showing exactly what failed and why. Call (516) 240-9191 for a camera inspection and a written price.
Most mortar repointing, flashing, and waterproofing jobs in Flushing are completed in one day for a standard single-flue chimney. A partial rebuild or liner installation usually takes two to three days depending on access and weather. We’ll give you a written job duration on the scope document before we schedule anything. Call (516) 240-9191 and we’ll walk you through a realistic timeline for your specific chimney.
Chimney repair in Flushing typically ranges from $450 for a small repointing job to $9,000 or more for a full above-roofline rebuild. Most common repairs, like flashing replacement or partial repointing, fall between $600 and $1,500. The only way to get an exact number is a camera inspection plus a written quote, which we provide before any work begins. Call (516) 240-9191 to schedule yours.
Sometimes a cracked clay tile liner can be repaired with HeatShield cerfractory sealant rather than replaced, saving thousands. If the liner is collapsed or the gaps are too widespread, a stainless DuraFlex liner is the correct fix. We only recommend liner work based on camera footage we can show you, and if your liner can safely wait, we’ll tell you that plainly. Call (516) 240-9191 and you’ll see the same video we’re looking at.
Yes. We answer calls 24/7 with a live person, and we prioritize Flushing jobs that present fire or carbon monoxide risk, such as a blocked flue or a falling brick hazard. Emergency opening and stabilization can usually be scheduled within 24 hours. Call (516) 240-9191 anytime and you’ll talk to a human who can dispatch a technician.
Every Level Two Chimney Flushing repair includes a written warranty with specific coverage terms for the work performed, plus the 365-Day Done Right Promise: if it’s not done right, we make it right. The warranty is in your hands before work starts, not after. Call (516) 240-9191 and we’ll put the warranty terms in writing with your quote.
Clear the area around your fireplace and remove anything fragile from the mantel. Move vehicles out of the driveway or the closest parking spot so our team can stage ladders and materials. You don’t need to be home for the exterior work itself, but plan to be present for the first 15 minutes so the technician can walk you through the camera findings before anything gets quoted. Call (516) 240-9191 if you have questions about your specific setup.
Schedule Your Chimney Repair Service in Flushing Today
The chimney isn’t going to fix itself, and waiting through another Flushing winter only makes the repair larger. Call (516) 240-9191 and we’ll schedule a Level 2 camera inspection, write you a fixed-price repair scope, and get the work scheduled while the weather holds. No obligation, no pressure, just a written price and photos you can verify with your own eyes.