Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFamco Chimney Cap & Crown in Flushing: What to Know First
Famco chimney cap and crown work in Flushing typically runs $340-$1,400 depending on whether we’re repairing the existing components or replacing them outright. We’re an independent Famco service provider, which means we inspect, quote, and install without any manufacturer restrictions on parts or pricing. Most Famco cap and crown jobs in Flushing are completed in a single visit, and every job gets a written price before we touch anything.
This page is for Flushing homeowners who own a Famco cap, crown, or chase cover and want to know what’s actually going on up there. If you’ve got a Famco product that’s rusting, leaking, or pulling away from the flue, call (516) 240-9191. Corrine Halstead and our team will put a camera on it and show you exactly what we’re seeing.
How Famco Products Fail - and How We Fix Them
- Famco Royal caps and leg corrosion near the screen seam. On older single-flue Royal models we see the stainless legs hold up fine but the galvanized screen ring starts to pit where it meets the hood. Flushing’s salt air off the Long Island Sound accelerates this. We replace the screen ring or the full cap depending on how far the corrosion has spread, and we always check the leg fasteners while we’re up there.
- Famco multi-flue caps with undersized mounting brackets. Several of the multi-flue caps installed on Flushing row houses in the early 2000s came with brackets that don’t grab enough of the flue tile. Wind from the north off the bay works them loose over a season or two. We refit the bracket with a heavier gauge or add a second anchor point, and we photograph the before-and-after so you can see the difference.
- Chase covers (Famco top-mount caps) with standing water. Flat or low-slope chase covers collect water, and once the powder coat scratches, the steel underneath starts to rust through in three to five years. We see this on Flushing colonials with wood-framed chases. The fix is a replacement cover with a proper drain channel, or a crown-coat repair if the base is still structurally sound.
- Crown cracks from thermal cycling, not from impact. Most crown damage in Flushing isn’t from anything hitting the chimney. It’s the freeze-thaw cycle working on hairline cracks that were already there. Famco crowns on attached homes near Flushing Town Hall sit close to parapet walls, and the trapped moisture makes the spalling worse. We grind out the cracks, seal the crown with a flexible crown coat, and document the repaired surface with camera shots.
- Famco caps installed without a proper flue-to-cap size match. This is the one we see most often. A cap that’s an inch too small for the flue restricts draft, and one that’s too large lets rain in around the edges. We measure the flue opening, not the old cap, when we quote a replacement. It’s the only way to get the draft right on older Flushing masonry chimneys.
Our Famco Chimney Cap & Crown Process
- 1
You call, we answer. A live person picks up at (516) 240-9191, day or night. We ask about the symptoms: water in the firebox, rust stains, a cap that’s visibly tilted, or a crown that’s shedding pieces.
- 2
We schedule the visit and tell you who’s coming. Background-checked, uniformed technician, license number on file, and a text when they’re on the way to your Flushing address.
- 3
Camera inspection of the cap, crown, and flue. This is an NFPA 211 Level 2 inspection. We document everything with photos: the crown surface, the cap fasteners, the flue tile condition, and any water intrusion paths. You see the footage before we discuss any repair.
- 4
Written price and scope, decided together. We’ll tell you if your Famco cap can be saved with a repair or if replacement makes more sense. We use OEM Famco parts when they’re the right tool and quality aftermarket parts when they perform better for less, and we tell you which is which and why. The price on paper is the price. No add-ons at the door.
- 5
The work, done clean. Cap installation or crown repair is done the same day in most cases. We protect the roof, keep the work area contained, and clean up everything before we leave.
- 6
Photo record and written warranty. You get a documented photo record of the completed work and a written warranty under Clause 4 of the Haven Standard. If it’s not done right, we make it right under the 365-Day Done Right Promise.
BeforeAfterWhat Famco Chimney Cap & Crown Costs in Flushing
Here’s what we’re quoting on Famco jobs in Flushing right now. These are real ranges, not teaser prices.
- Famco single-flue cap replacement: $340-$520 installed, depending on flue size and roof access.
- Famco multi-flue cap replacement: $620-$1,100, depending on flue configuration and whether custom fabrication is needed.
- Crown repair with flexible crown coat: $275-$450 for a standard residential crown, before major masonry rebuild work.
- Full crown rebuild (removal and recast): $900-$1,400 when the old crown is spalled or structurally failed.
- Chase cover replacement (Famco top-mount): $480-$850 depending on chase dimensions and steel gauge.
What moves the price: roof pitch and access difficulty, flue tile condition underneath the cap, and whether we’re matching an existing multi-flue configuration or starting fresh. We’ll never quote over the phone without seeing it. Call (516) 240-9191 for a free estimate, and we’ll put a camera on the chimney and give you a written number the same day.
Why Flushing Homeowners Call Level Two Chimney Flushing for Famco Work
Famco makes a solid cap, but no cap survives a bad installation or a Flushing winter without some attention. What we bring is the documentation habit we’ve had since 2009: every job gets a camera inspection first, a written price before work, and a photo record when we’re done. That’s been Clause 4 of the Haven Standard since before insurers thought to ask for it. We’ve inspected and cleaned more than 38,000 chimneys since then, and every one of those jobs has a written record behind it.
We service Famco products alongside DuraFlex, HeatShield, and Gelco, so if your cap problem turns out to be a liner problem in disguise, we’re not going to shrug and refer you out. We’ll quote the whole thing, in writing, before anyone starts. Free second opinions on any written estimate, including the one your last chimney company gave you. Corrine Halstead is the owner you’ll be working with, and the camera doesn’t negotiate. It just shows you what’s there.
FAQs
Replacing a Famco cap with an equivalent-quality cap does not void anything as long as the cap is installed to the manufacturer’s flue sizing specs, and we document that fit with photos for your records. As an independent Famco service provider, we’re not bound to sell only Famco parts, which means we can quote you a repair or replacement based on what actually works. We’ll tell you plainly when an OEM Famco cap is worth the money and when an aftermarket cap does the same job for less.
Most single-flue cap replacements and crown repairs in Flushing are done within one week of the inspection, and many are same-day if we have the part on the truck. Custom or multi-flue Famco configurations can take two to three weeks if fabrication is needed. Call (516) 240-9191 and we’ll give you a real timeline, not a promise we can’t keep.
If the crown has hairline cracks with no spalling and no water entering the flue, a crown coat repair usually buys you another five to seven years. If chunks of the crown are missing, the mortar is crumbling, or you’ve got water staining in the firebox, that’s a rebuild. We’ll show you the camera footage and tell you which condition you have before we quote anything.
Yes, and those are some of the most common jobs we do in Flushing. The attached homes near Flushing Town Hall and the older colonials north of Northern Boulevard have multi-flue configurations that need custom bracket work and careful flue measurement. We quote the job based on the flue dimensions we measure on site, not the old cap that’s already sitting there.
Yes. Every Famco cap and crown job we do in Flushing is backed by our 365-Day Done Right Promise, which means if it’s not done right, we make it right. That promise is Clause 4 of the Haven Standard, the same standard we’ve worked to since 2009. The written warranty you get after the job spells out exactly what’s covered and for how long.
Written by Corrine Halstead, Owner, Level Two Chimney Flushing at Level Two Chimney Flushing, serving Flushing and nearby areas.